Corus is pleased to provide its Automotive Customers with materials data prepared and formatted to be Ready to Run  | To download either Right Click on the file icon next to the required data and choose Save Target As.. from the popup menu or Left Click on the file icon and use the File.. Save As.. menu option |
High-Strength Low-Alloy Steel
Medium-high strength steel galvanized for structural and some crash applications
| Corus H 300 LAD, Thickness range: 0.50-2.00 mm | | Corus H 340 LAD, Thickness range: 0.60-2.00 mm |
Bake-Hardenable Steel
Galvanized steel exploiting the bake-hardenability (around 40MPa) during the paint bake cycle. Very suitable in A-class finish form for application on outer panels for superb dent resistance. | Corus H 220 BD, Thickness range: 0.56-1.80 mm |
Interstitial Free (YD or IF) Steel
Medium strength galvanized steel with good formability for general applications within the body structure or for exterior panels with A class finish.
| Corus H 220 YD, Thickness range: 0.56-1.60 mm | | Corus H 260 YDZ, Thickness range: 0.56-1.20 mm |
Steel for Forming (galvanized)
DX grades are low-strength high-formability galvanized steels for all applications, including outer panels for A class finish surfaces. Formability and deep-drawability range from reasonable (DX51) to excellent (DX57). DX56 and DX57 should suit the most difficult forming panel applications such as bodysides.
| Corus DX 52 DZ, Thickness range: 0.38-2.50 mm | | Corus DX 56 DZ, Thickness range: 0.38-1.80 mm |
Steel for Forming (uncoated)
DC grades are low-strength high-formability uncoated steels, ranging in formability from DC01 to DC06. Automotive applications include outer panels, roofs, internal fittings, etc.
| Corus DC 04, Thickness range: 0.33-3.00 mm | | Corus DC 06, Thickness range: 0.43-1.80 mm |
Disclaimer
Material data is taken from a coil sample test according to Corus' internal standard, but is not guaranteed to mirror all Corus' manufactured material of the same grade. Corus endeavours to select coil samples which are representative of everyday production at the time of testing although these data may be subject to change without prior notice. Corus Group plc, including its subsidiaries, does not accept responsibility or liability for errors or information which is found to be misleading |
