 | | | | | | |  Corus Strip Products produce uncoated and coated sheet steels in both the UK and IJmuiden in the Netherlands. A wide range of widths, grades, coatings and thicknesses are available. Much of this product range is produced specifically for automotive, typically for auto-body applications. Some grades are also available pre-painted. | |
| | The Corus works at Llanwern and Port Talbot together manufacture hot-rolled steel, cold-rolled steel and hot-dip galvanised steel. These products make an important difference to the world in which we live.
|
|
| | Part 1 of the product catalogue: Introduction and hot-rolled products
|
|
| | Part 2 of the product catalogue: Cold-rolled products
|
|
| | Part 3 of the product catalogue: hot-dip galvanised products.
|
|
| | Part 4 of the product catalogue: general information and glossary
|
|
| | Product range and properties of hot-dip galvanised steels and how to form, join and finish them.
|
|
| | Galvatite with a Tenform CMN300 substrate is characterised by a higher yield strength than the forming qualities of standard mild steels and a low ratio of yield strength to tensile strength. It is available with a zinc coating (Z) or an iron-zinc alloy coating (ZF).
|
|
| | Aludip provides corrosion resistance at elevated temperatures, plus the strength of steel. It comes to you with all the experience, quality, and back-up available from the Aluminised Products business of Corus.
|
|
| | The enhanced material for manufacturing. Cold-rolled strip steel has refined properties for manufacturing. It offers thin, strong and formable strip with a surface capable of the highest quality paint finish. The continuously annealed product from Corus is highly consistent, with tight tolerances on dimensions and shape.
|
|
| | European structural steel standard EN 10025-2 : 2004. Grade designations, properties and nearest equivalents. EN 10025 : 2004 is the new six-part European standard for hot-rolled structural steel.The information here covers the steels in part 2 of that standard, which are grades manufactured by Corus Strip Products UK.The new standard designates grades differently from the previous standards for these steels.
|
|
| | Tenform high-strength formable steel substrates. Galvatite is available with Tenform high-strength formable steel substrates in a range of strengths, forming capabilities and steel characteristics. It has higher yield strengths than the forming qualities of standard mild steels.
|
|
| | Tenform XF350 is hot-rolled high-strength low-alloy steel with enhanced properties for forming and welding. It has been specially developed to combine high strength with good formability.
|
|
| | Hot-rolled high-strength low-alloy steel. This product is hot-rolled high-strength low-alloy steel with enhanced properties for forming and welding. It has been specially developed to combine high strength with good formability.
|
|
| | Tenform XF, XK and CMN. Tenform is hot-rolled high-strength formable strip steel available in a range of strengths, forming capabilities and steel characteristics. It has higher yield strengths than the forming qualities of standard mild steels.
|
|
| |
| |
| |
| | | | | | | Corus Strip Products IJmuiden |
| | | |
|
| | |
| |
|
| |
| |
